特定型号重置指南
Epson WF-3723 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson WF-3723 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Understanding the Epson WF-3723 waste ink warning
Waste ink produced by cleaning cycles is collected inside the printer. Epson WF-3723 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson WF-3723. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson WF-3723
先完成以下连接检查，然后运行重置程序；在此过程中不要打开其他打印机程序。.
-
安装原始驱动程序
Install the official Epson driver for WF-3723 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson WF-3723 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WF-3723.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson WF-3723 is not detected
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- Install the original Epson driver for WF-3723; a generic Windows driver may not expose the required communication interface.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
Epson WF-3723 reset FAQ
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Can I reset Epson WF-3723 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
Does Epson WF-3723 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.