Epson TX700W Waste Ink Counter Reset

The Epson TX700W is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson TX700W tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson TX700W Waste Ink Counter

With Wic Reset Connect, you can reset the Epson TX700W waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Reset Epson TX700W Waste Ink Counter in 3 Steps

1. Paso 1: Use a Windows PC (7–11) with Internet access. Connect Epson TX700W via USB (Wi-Fi reset is not supported).
2. Paso 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson TX700W.
3. Paso 3: Use the key to reset the counter, wait for completion, then restart Epson TX700W to finalize.

Most Epson TX700W waste counter resets finish in ~1–2 minutes.

What You Need

• Valid Wic Reset Connect reset key
• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)
• Windows 7/8/10/11 PC

Common Fixes

• Try another USB cable (some cables are charge-only).
• Use a direct USB connection (avoid hubs).
• Temporarily disable VPN/proxy if validation fails.
• Restart printer and PC, then try again.
• Run the app as Administrator.

Frequently Asked Questions