Epson ME-560W Waste Ink Counter Reset

When the Epson ME-560W reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ME-560W uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson ME-560W Stops Printing (Waste Counter Limit)

Con Wic Reset Connect, you can reset the Epson ME-560W waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Reset Epson ME-560W Waste Ink Counter in 3 Steps

Paso 1: Prepare a Windows PC + USB cable and connect Epson ME-560W directly. Keep Internet enabled for validation.
Paso 2: Abrir Wic Reset Connect with admin privileges and verify device recognition for Epson ME-560W.
Paso 3: Use the key to reset the counter, wait for completion, then restart Epson ME-560W to finalize.

Comprar clave de reinicio ⬇️ Descargar Wic Reset Connect Instrucciones

Most Epson ME-560W waste counter resets finish in ~1–2 minutes.

Preguntas frecuentes

¿Cuánto tarda?

Suele durar entre 1 y 2 minutos.

¿Puedo reiniciar a través de Wi-Fi?

No. El reinicio requiere una conexión USB a un PC con Windows.

¿Y si el reinicio no funciona?

Compruebe el cable/puerto USB, ejecute como administrador y cierre otras utilidades de la impresora.

¿Necesito un centro de servicio?

Normalmente no para un bloqueo de contador de tinta residual; un reinicio suele ser suficiente.

Guide prepared for Epson ME-560W – Waste Ink Counter Reset using Wic Reset Connect.