Epson L575 Waste Ink Counter Reset

If your Epson L575 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L575 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson L575 Show ‘Service Required’?

Con Wic Reset Connect, you can reset the Epson L575 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Step-by-Step: Epson L575 Waste Counter Reset

1. Paso 1: Connect Epson L575 to a Windows computer with a stable Internet connection using a USB cable.
2. Paso 2: Abrir Wic Reset Connect with admin privileges and verify device recognition for Epson L575.
3. Paso 3: Pega la clave de reinicio, pulsa Restablecer, and after completion power-cycle Epson L575.

Most Epson L575 waste counter resets finish in ~1–2 minutes.

Lo que necesita

• Conexión a Internet estable durante el reinicio
• Windows 7/8/10/11 PC
• Requiere conexión USB (no admite restablecimiento Wi-Fi)
• Válido Wic Reset Conectar tecla de reinicio

Solución de problemas

• Reinicie la impresora y el PC y vuelva a intentarlo.
• Ejecute la aplicación como Administrador.
• Cierre Epson Status Monitor u otras utilidades de la impresora.
• Prueba con otro cable USB (algunos cables son de carga).
• Desactivar temporalmente VPN/proxy si falla la validación.

Preguntas frecuentes