Epson L495 Waste Ink Counter Reset

The Epson L495 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson L495 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson L495 Show ‘Service Required’?

Con Wic Reset Connect, you can reset the Epson L495 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Three Steps to Restore Epson L495 Printing

1. Paso 1: Use a Windows PC (7–11) with Internet access. Connect Epson L495 via USB (Wi-Fi reset is not supported).
2. Paso 2: Inicio Wic Reset Connect in Administrator mode and wait until Epson L495 appears in the device list.
3. Paso 3: Pega la clave de reinicio, pulsa Restablecer, and after completion power-cycle Epson L495.

Most Epson L495 waste counter resets finish in ~1–2 minutes.

Lo que necesita

• Requiere conexión USB (no admite restablecimiento Wi-Fi)
• Conexión a Internet estable durante el reinicio
• Válido Wic Reset Conectar tecla de reinicio
• Windows 7/8/10/11 PC

Si no se detecta la impresora

• Desactivar temporalmente VPN/proxy si falla la validación.
• Cierre Epson Status Monitor u otras utilidades de la impresora.
• Reinicie la impresora y el PC y vuelva a intentarlo.
• Ejecute la aplicación como Administrador.
• Utiliza una conexión USB directa (evita los concentradores).

Preguntas frecuentes