Model-specific reset guide
Epson L365 Reiniciar Contador de Tinta Gastada
The service-required message on Epson L365 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
Why Epson L365 stops printing
Epson L365 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson L365. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson L365
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for L365 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson L365 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L365.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson L365 is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson L365 reset FAQ
Can I reset Epson L365 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson L365
A direct USB connection, the correct driver and a valid key are all you need to reset Epson L365.