Model-specific reset guide

Epson L3165 Reset Waste Ink Counter

The service-required message on Epson L3165 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.

Tecla de reinicio$8,00
Instant email deliveryAsistencia técnica incluidaReplacement key after a failed reset
The problem

The counter behind the Epson L3165 warning

The printer protects against possible ink overflow by monitoring an internal service counter. On Epson L3165, reaching the threshold can trigger an ink pad warning and block further jobs.

Wic Reset Connect is designed to reset the compatible counter in Epson L3165. The physical waste ink system should still be inspected and maintained when necessary.

Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
Tecla de reinicioFor this operation
Step by step

Reset the counter in Epson L3165

Start with the connection checks below, then run the reset without opening other printer programs during the process.

  1. Install the original driver

    Install the official Epson driver for L3165 and confirm that Windows can see the printer.

  2. Connect directly by USB

    Connect Epson L3165 to the computer without Wi-Fi, a hub or an adapter.

  3. Start Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L3165.

  4. Enter the key and reset

    Enter the purchased key, choose Reset and keep the printer connected until completion.

Finish correctly: Do not disconnect the cable while the reset is running. Restart Epson L3165 only after Wic Reset Connect reports that the operation is complete.
If Epson L3165 is not detected
  • Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
  • Install the original Epson driver for L3165; a generic Windows driver may not expose the required communication interface.
  • Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
  • Try another USB port and a known data-capable USB cable if the printer is not detected.

Open full instructions

Common questions

Epson L3165 reset FAQ

Does Epson L3165 need service mode?

No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.

How long does the reset take?

The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.

Does the reset clean or replace the ink pads?

No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.

Reset with confidence

Restore Epson L3165

Ready to restore Epson L3165? Check the requirements once more and start the guided reset.

Reset key: $8,00
Carrito de compra
Seleccione su moneda