Model-specific reset guide
Epson BX305F Reset Waste Ink Counter
The service-required message on Epson BX305F often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
Why the ink pad counter blocks Epson BX305F
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson BX305F adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson BX305F. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson BX305F
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for BX305F and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson BX305F to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson BX305F.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson BX305F is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Install the original Epson driver for BX305F; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
Epson BX305F reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson BX305F need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Can I reset Epson BX305F over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson BX305F
Ready to restore Epson BX305F? Check the requirements once more and start the guided reset.