Model-specific reset guide

Canon iP1700 Ink Absorber Full Reset

The waste ink system in Canon iP1700 collects ink used during cleaning cycles. Once the estimated limit is reached, service mode and a compatible counter reset may be required.

Tecla de reinicio$8,00
Instant email deliveryAsistencia técnica incluidaReplacement key after a failed reset
The problem

What stops Canon iP1700 from printing

Cleaning operations send unused ink into absorber pads inside the printer. Canon iP1700 estimates their usage with an electronic counter and can lock printing when that value reaches its limit.

Wic Reset Connect is designed to reset the compatible counter in Canon iP1700. The physical waste ink system should still be inspected and maintained when necessary.

Required for Canon

Enter service mode on Canon iP1700

The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.

Open Service Mode Guide

Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
Tecla de reinicioFor this operation
Step by step

Reset the counter in Canon iP1700

The counter reset normally takes only a few minutes after Canon iP1700 has entered service mode successfully.

  1. Prepare the printer

    Resolve other errors, confirm a steady power light and enter service mode using the linked guide.

  2. Connect directly by USB

    Connect Canon iP1700 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.

  3. Start Wic Reset Connect

    Run the program as Administrator and wait until the Canon service-mode device is detected.

  4. Enter the key and reset

    Enter the purchased key, select Reset and keep the printer connected until confirmation appears.

Finish correctly: Once Wic Reset Connect reports success, turn Canon iP1700 off and on, then send a small test page.
If Canon iP1700 is not detected
  • Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
  • Run Wic Reset Connect as Administrator and keep internet access active for key validation.
  • If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
  • Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.

Open full instructions

Common questions

Canon iP1700 reset FAQ

Does Canon iP1700 require service mode?

Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.

¿Cuántas veces debo pulsar Stop/Reset?

The correct count depends on the printer series. Use the linked Canon service-mode guide and do not guess.

What if my reset key was used during a failed attempt?

Correct the cause first, then use the new-key generator or contact support for assistance.

Reset with confidence

Restore Canon iP1700

Ready to reset Canon iP1700? Verify the power light, USB connection and service-mode state before continuing.

Reset key: $8,00
Carrito de compra
Seleccione su moneda