Fix Epson XP-310 Service Required – Waste Counter Reset

Epson XP-310 Waste Ink Counter Reset

The Epson XP-310 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson XP-310 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson XP-310 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson XP-310 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Reset Epson XP-310 Waste Ink Counter in 3 Steps

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-310 via USB (Wi-Fi reset is not supported).
Step 2: Run Wic Reset Connect as Administrator and confirm Epson XP-310 is detected.
Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-310.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson XP-310 waste counter resets finish in ~1–2 minutes.

What You Need

Stable Internet connection during reset
Windows 7/8/10/11 PC
USB connection required (Wi-Fi reset not supported)
Valid Wic Reset Connect reset key

Frequently Asked Questions

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

How long does it take?

Usually about 1–2 minutes.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson XP-310 – Waste Ink Counter Reset using Wic Reset Connect.