Epson R280 Ink Pad Counter Reset Guide

Epson R280 Waste Ink Counter Reset

If your Epson R280 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson R280 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson R280 Ink Pad Counter Warning?

Most Epson R280 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson R280 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Connect Epson R280 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson R280.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson R280.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson R280 waste counter resets finish in ~1–2 minutes.

FAQ

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson R280 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart