Epson NX530 Waste Ink Counter Reset

The Epson NX530 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson NX530 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson NX530 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson NX530 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Epson NX530 Ink Pad Counter Reset – Quick Steps

1. Step 1: Connect Epson NX530 to a Windows computer with a stable Internet connection using a USB cable.
2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson NX530.
3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson NX530.

Most Epson NX530 waste counter resets finish in ~1–2 minutes.

Before You Begin

• Stable Internet connection during reset
• Valid Wic Reset Connect reset key
• USB connection required (Wi-Fi reset not supported)
• Windows 7/8/10/11 PC

Troubleshooting

• Use a direct USB connection (avoid hubs).
• Try another USB cable (some cables are charge-only).
• Restart printer and PC, then try again.
• Close Epson Status Monitor or other printer utilities.
• Temporarily disable VPN/proxy if validation fails.

FAQ