How to Reset Epson NX620 Waste Ink Counter

Epson NX620 Waste Ink Counter Reset

The Epson NX620 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson NX620 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson NX620 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson NX620 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Epson NX620 Ink Pad Counter Reset – Quick Steps

Step 1: Connect Epson NX620 to a Windows computer with a stable Internet connection using a USB cable.
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson NX620.
Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson NX620.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson NX620 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

How long does it take?

Usually about 1–2 minutes.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson NX620 – Waste Ink Counter Reset using Wic Reset Connect.