Fix Epson NX100 Service Required – Waste Counter Reset

Epson NX100 Waste Ink Counter Reset

The Epson NX100 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson NX100 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson NX100 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson NX100 waste counter reset in minutes.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson NX100 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson NX100 via USB (Wi-Fi reset is not supported).
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson NX100 is detected.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson NX100.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson NX100 waste counter resets finish in ~1–2 minutes.

What You Need

  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)

Guide prepared for Epson NX100 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart