Epson ME-535 Ink Pad Counter Reset Guide

Epson ME-535 Waste Ink Counter Reset

The Epson ME-535 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson ME-535 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson ME-535 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ME-535 waste counter reset in minutes.

Common Symptoms

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Reset Epson ME-535 Waste Ink Counter in 3 Steps

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson ME-535 via USB (Wi-Fi reset is not supported).
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ME-535.
Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ME-535.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson ME-535 waste counter resets finish in ~1–2 minutes.

System Requirements

Valid Wic Reset Connect reset key
Stable Internet connection during reset
USB connection required (Wi-Fi reset not supported)
Windows 7/8/10/11 PC

Common Fixes

Temporarily disable VPN/proxy if validation fails.
Try another USB cable (some cables are charge-only).
Close Epson Status Monitor or other printer utilities.
Run the app as Administrator.
Restart printer and PC, then try again.

Frequently Asked Questions

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

How long does it take?

Usually about 1–2 minutes.

Guide prepared for Epson ME-535 – Waste Ink Counter Reset using Wic Reset Connect.