Epson ET-4700 Ink Pad Counter Reset Guide

Epson ET-4700 Waste Ink Counter Reset

The Epson ET-4700 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-4700 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson ET-4700 Ink Pad Counter Warning?

Most Epson ET-4700 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Step-by-Step: Epson ET-4700 Waste Counter Reset

Step 1: Prepare a Windows PC + USB cable and connect Epson ET-4700 directly. Keep Internet enabled for validation.
Step 2: Run Wic Reset Connect as Administrator and confirm Epson ET-4700 is detected.
Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson ET-4700.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson ET-4700 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

How long does it take?

Usually about 1–2 minutes.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson ET-4700 – Waste Ink Counter Reset using Wic Reset Connect.