Epson EP-801A Waste Ink Counter Reset

When the Epson EP-801A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson EP-801A accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson EP-801A Stops Printing (Waste Counter Limit)

Most Epson EP-801A waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Reset Epson EP-801A Waste Ink Counter in 3 Steps

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-801A via USB (Wi-Fi reset is not supported).
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson EP-801A.
Step 3: Use the key to reset the counter, wait for completion, then restart Epson EP-801A to finalize.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson EP-801A waste counter resets finish in ~1–2 minutes.

Common Fixes

Run the app as Administrator.
Temporarily disable VPN/proxy if validation fails.
Use a direct USB connection (avoid hubs).
Try another USB cable (some cables are charge-only).
Restart printer and PC, then try again.

Frequently Asked Questions

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

How long does it take?

Usually about 1–2 minutes.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson EP-801A – Waste Ink Counter Reset using Wic Reset Connect.