Canon XK60 Ink Absorber Reset Without Service Center

Canon XK60 Ink Absorber Full Reset

Canon XK60 can lock printing when the waste ink (ink absorber) counter hits a predefined threshold. This guide explains how to reset it.

Inside Canon printers, absorber pads collect excess ink from cleaning and maintenance cycles. The printer uses an internal counter to estimate pad saturation.

This page is prepared for Canon XK60. Service mode instructions are shown only when a matching series procedure is known.

Clear the Ink Absorber / Waste Ink Counter

Completing the reset clears the internal ink absorber counter stored in printer memory and restores normal operation.

Important Notes

If absorber pads are truly saturated, ignoring maintenance can lead to ink leakage inside the printer. The counter reset only removes the software lock.

Download & get started

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Use a reliable USB connection and follow the steps in order.

Troubleshooting

Power-cycle the printer and try again.
Repeat the service mode steps carefully (timing matters).
Try a different USB cable/port if using PC software.
Use the correct Stop/Reset press count for your series.
Close other Canon printer utilities while resetting.

Guide prepared for Canon XK60 – Ink Absorber / Waste Ink Counter Reset using Wic Reset Connect.