MG5765 Printer Reset – Ink Absorber Counter Explained

Canon MG5765 Ink Absorber Full Reset

When Canon MG5765 triggers an ink absorber full condition, the printer may block printing as a protective measure. The solution is typically a waste ink counter reset.

Ink absorber pads store waste ink during normal operation. Canon firmware tracks this using a software counter and may stop printing when it reaches the limit.

This page is prepared for Canon MG5765. Service mode instructions are shown only when a matching series procedure is known.

Common Symptoms

Service / maintenance warning on the screen or driver
Printer refuses to print even with ink available
Blinking lights and queued jobs fail
Error reappears after restart

How to Enter Service Mode on Canon MG5765

To access maintenance functions, Canon MG5765 may need to be placed in service mode first.

Turn the printer OFF.
Press and hold Stop/Reset.
While holding Stop/Reset, press and hold Power.
Release Stop/Reset (keep holding Power).
Press Stop/Reset 6 times.
Release Power — the printer should enter service mode.

If it doesn’t work, repeat the sequence carefully. The press count depends on the series.

Perform the Waste Ink Counter Reset

After service mode is enabled (if required), the waste ink counter can be reset using a supported reset procedure/software.

Warnings

If absorber pads are truly saturated, ignoring maintenance can lead to ink leakage inside the printer. The counter reset only removes the software lock.

Reset tools and instructions

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

For best results, avoid rushing button presses—consistent timing matters.

If It Doesn’t Work

Close other Canon printer utilities while resetting.
Repeat the service mode steps carefully (timing matters).
Use the correct Stop/Reset press count for your series.
Try a different USB cable/port if using PC software.
Power-cycle the printer and try again.

FAQ

Does reset clean the absorber pads?

No. It resets the counter (software). Pads may still require physical maintenance in high-usage cases.

How many times should I press Stop/Reset?

It depends on the series. Many use 5 presses; PRO/imagePROGRAF/MG use 6 in this generator.

Does every Canon model need service mode?

No. The generator shows service mode steps only when the series procedure is known.

How long does it take?

Usually a few minutes once the correct steps are followed.

Guide prepared for Canon MG5765 – Ink Absorber / Waste Ink Counter Reset using Wic Reset Connect.