Fix Ink Absorber Full Error on Canon IX6820

Canon IX6820 Ink Absorber Full Reset

If your Canon IX6820 suddenly refuses to print and shows a maintenance or service warning, the ink absorber counter may have reached its limit.

During head cleaning, surplus ink is routed to internal absorber pads. Canon IX6820 monitors this via a counter and can lock printing at a threshold.

This page is prepared for Canon IX6820. Service mode instructions are shown only when a matching series procedure is known.

Typical Signs

Completing the reset clears the internal ink absorber counter stored in printer memory and restores normal operation.

Treat the reset as a maintenance step. If your printer has extremely high usage, consider cleaning/replacing absorber pads to avoid overflow.

For best results, avoid rushing button presses—consistent timing matters.

Does reset clean the absorber pads?

No. It resets the counter (software). Pads may still require physical maintenance in high-usage cases.

Does every Canon model need service mode?

No. The generator shows service mode steps only when the series procedure is known.

How long does it take?

Usually a few minutes once the correct steps are followed.

How many times should I press Stop/Reset?

It depends on the series. Many use 5 presses; PRO/imagePROGRAF/MG use 6 in this generator.

Guide prepared for Canon IX6820 – Ink Absorber / Waste Ink Counter Reset using Wic Reset Connect.