Model-specific reset guide
Canon iP2600 Ink Absorber Full Reset
Canon iP2600 may block print jobs after recording enough cleaning and maintenance cycles. Use the sequence below to enter service mode and reset the stored value.
Understanding the Canon iP2600 ink absorber warning
An absorber message concerns both software and maintenance. The counter can be reset, while heavily saturated pads may still need cleaning or replacement.
Wic Reset Connect is designed to reset the compatible counter in Canon iP2600. The physical waste ink system should still be inspected and maintained when necessary.
Enter service mode on Canon iP2600
The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.
Reset the counter in Canon iP2600
The counter reset normally takes only a few minutes after Canon iP2600 has entered service mode successfully.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the linked guide.
-
Connect directly by USB
Connect Canon iP2600 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon iP2600 is not detected
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- Connect Canon iP2600 directly to the computer and try another data-capable USB cable or port.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
Canon iP2600 reset FAQ
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
How many times should I press Stop/Reset?
The correct count depends on the printer series. Use the linked Canon service-mode guide and do not guess.
Restore Canon iP2600
Ready to reset Canon iP2600? Verify the power light, USB connection and service-mode state before continuing.