Epson XP-810 Waste Ink Counter Reset

Epson XP-810 Waste Ink Counter Reset

The Epson XP-810 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-810 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson XP-810 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson XP-810 waste counter reset in minutes.

Reset Epson XP-810 Waste Ink Counter in 3 Steps

  1. Βήμα 1: Prepare a Windows PC + USB cable and connect Epson XP-810 directly. Keep Internet enabled for validation.
  2. Βήμα 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-810.
  3. Βήμα 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-810.
Buy Reset Key ⬇️ Λήψη Wic Reset Connect Οδηγίες

Most Epson XP-810 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset

Common Fixes

  • Try another USB cable (some cables are charge-only).
  • Close Epson Status Monitor or other printer utilities.
  • Restart printer and PC, then try again.
  • Use a direct USB connection (avoid hubs).
  • Run the app as Administrator.

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson XP-810 – Waste Ink Counter Reset using Wic Reset Connect.

Καλάθι Αγορών