Epson TX800FW Waste Ink Counter Reset

The Epson TX800FW is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson TX800FW accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson TX800FW Stops Printing (Waste Counter Limit)

Most Epson TX800FW waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Reset Epson TX800FW Waste Ink Counter in 3 Steps

1. Βήμα 1: Use a Windows PC (7–11) with Internet access. Connect Epson TX800FW via USB (Wi-Fi reset is not supported).
2. Βήμα 2: Run Wic Reset Connect as Administrator and confirm Epson TX800FW is detected.
3. Βήμα 3: Use the key to reset the counter, wait for completion, then restart Epson TX800FW to finalize.

Most Epson TX800FW waste counter resets finish in ~1–2 minutes.

System Requirements

• USB connection required (Wi-Fi reset not supported)
• Windows 7/8/10/11 PC
• Valid Wic Reset Connect reset key
• Stable Internet connection during reset

If the Printer Is Not Detected

• Temporarily disable VPN/proxy if validation fails.
• Try another USB cable (some cables are charge-only).
• Run the app as Administrator.
• Restart printer and PC, then try again.
• Use a direct USB connection (avoid hubs).

FAQ