Epson TX800FW Waste Ink Counter Reset

The Epson TX800FW is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson TX800FW accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson TX800FW Stops Printing (Waste Counter Limit)

Most Epson TX800FW waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.

Gejala Umum

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Reset Epson TX800FW Waste Ink Counter in 3 Steps

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson TX800FW via USB (Wi-Fi reset is not supported).
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson TX800FW is detected.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson TX800FW to finalize.

Most Epson TX800FW waste counter resets finish in ~1–2 minutes.

Persyaratan Sistem

• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Windows 7/8/10/11 PC
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Koneksi Internet stabil selama pengaturan ulang

Jika Printer Tidak Terdeteksi

• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Jalankan aplikasi sebagai Administrator.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Gunakan koneksi USB langsung (hindari hub).

PERTANYAAN YANG SERING DIAJUKAN