Model-specific reset guide

Epson L3287 Επαναφορά μετρητή μελανιού αποβλήτων

When Epson L3287 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.

Πλήκτρο επαναφοράς$8,00
Instant email deliveryΠεριλαμβάνεται τεχνική υποστήριξηReplacement key after a failed reset
The problem

Before resetting Epson L3287

An ink pad message is a maintenance safeguard. It indicates that Epson L3287 has reached a stored waste ink value that must be reset before normal printing can resume.

Wic Reset Connect is designed to reset the compatible counter in Epson L3287. The physical waste ink system should still be inspected and maintained when necessary.

Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
Πλήκτρο επαναφοράςFor this operation
Step by step

Reset the counter in Epson L3287

Use the sequence below to establish a stable USB connection and clear the waste ink counter.

  1. Install the original driver

    Install the official Epson driver for L3287 and confirm that Windows can see the printer.

  2. Connect directly by USB

    Connect Epson L3287 to the computer without Wi-Fi, a hub or an adapter.

  3. Start Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L3287.

  4. Enter the key and reset

    Enter the purchased key, choose Reset and keep the printer connected until completion.

Finish correctly: When the success message appears, restart Epson L3287. Allow Windows to detect the printer again before sending a test page.
If Epson L3287 is not detected
  • Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
  • Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
  • Try another USB port and a known data-capable USB cable if the printer is not detected.
  • Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.

Open full instructions

Common questions

Epson L3287 reset FAQ

How long does the reset take?

The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.

Can I reset Epson L3287 over Wi-Fi?

No. Wic Reset Connect requires a direct USB connection to the Windows computer.

What if the first reset attempt fails?

Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.

Reset with confidence

Restore Epson L3287

Complete the Epson L3287 counter reset with Wic Reset Connect and assistance whenever you need it.

Reset key: $8,00
Καλάθι αγορών
Επιλέξτε το νόμισμά σας