Epson BX635FWD Waste Ink Counter Reset

Epson BX635FWD Waste Ink Counter Reset

The Epson BX635FWD delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson BX635FWD tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson BX635FWD Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson BX635FWD waste counter reset in minutes.

Step-by-Step: Epson BX635FWD Waste Counter Reset

  1. Βήμα 1: Prepare a Windows PC + USB cable and connect Epson BX635FWD directly. Keep Internet enabled for validation.
  2. Βήμα 2: Run Wic Reset Connect as Administrator and confirm Epson BX635FWD is detected.
  3. Βήμα 3: Paste the reset key, click Reset, and after completion power-cycle Epson BX635FWD.
Buy Reset Key ⬇️ Λήψη Wic Reset Connect Οδηγίες

Most Epson BX635FWD waste counter resets finish in ~1–2 minutes.

System Requirements

  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset

Troubleshooting

  • Run the app as Administrator.
  • Try another USB cable (some cables are charge-only).
  • Use a direct USB connection (avoid hubs).
  • Restart printer and PC, then try again.
  • Temporarily disable VPN/proxy if validation fails.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson BX635FWD – Waste Ink Counter Reset using Wic Reset Connect.

Καλάθι Αγορών