Model-specific reset guide
Πλήρης επαναφορά του απορροφητή μελανιού Canon TS3470
An absorber warning on Canon TS3470 does not necessarily mean that the printer is mechanically damaged. The software counter and the physical pads must be considered separately.
Before resetting Canon TS3470
Waste ink is routed away from the print head and retained inside the printer. The firmware in Canon TS3470 calculates usage and may stop new jobs to reduce overflow risk.
Wic Reset Connect is designed to reset the compatible counter in Canon TS3470. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TS3470
- Turn the printer off.
- Πατήστε παρατεταμένα Διακοπή/Επαναφορά.
- Ενώ κρατάτε πατημένο το Stop/Reset, πατήστε και κρατήστε πατημένο το Ισχύς.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5 φορές.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TS3470
The counter reset normally takes only a few minutes after Canon TS3470 has entered service mode successfully.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TS3470 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TS3470 is not detected
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- Connect Canon TS3470 directly to the computer and try another data-capable USB cable or port.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
Canon TS3470 reset FAQ
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
Πόσες φορές πρέπει να πατήσω το Stop/Reset;
For Canon TS3470, use 5 Stop/Reset presses in the sequence shown on this page.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Restore Canon TS3470
Wic Reset Connect combines a guided reset with support if Canon TS3470 does not respond as expected.