Epson XP-20 Waste Ink Counter Reset
When the Epson XP-20 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
A waste ink counter in the Epson XP-20 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.
Why the Epson XP-20 Stops Printing (Waste Counter Limit)
With Wic Reset Connect, you can reset the Epson XP-20 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Common Symptoms
- Printer refuses to print even with ink available
- Epson Status Monitor shows maintenance warning
- Blinking lights and blocked jobs
- Device is locked until reset is performed
Step-by-Step: Epson XP-20 Waste Counter Reset
- Schritt 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-20 via USB (Wi-Fi reset is not supported).
- Schritt 2: Run Wic Reset Connect as Administrator and confirm Epson XP-20 is detected.
- Schritt 3: Use the key to reset the counter, wait for completion, then restart Epson XP-20 to finalize.
Most Epson XP-20 waste counter resets finish in ~1–2 minutes.
What You Need
- USB connection required (Wi-Fi reset not supported)
- Valid Wic Reset Connect reset key
- Windows 7/8/10/11 PC
- Stable Internet connection during reset
If the Printer Is Not Detected
- Use a direct USB connection (avoid hubs).
- Restart printer and PC, then try again.
- Run the app as Administrator.
- Try another USB cable (some cables are charge-only).
- Close Epson Status Monitor or other printer utilities.
FAQ
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Guide prepared for Epson XP-20 – Waste Ink Counter Reset using Wic Reset Connect.