Epson SX425W Waste Ink Counter Reset
The Epson SX425W delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.
A waste ink counter in the Epson SX425W accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.
Why Does the Epson SX425W Show ‘Service Required’?
Most Epson SX425W waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.
Common Symptoms
- Printer refuses to print even with ink available
- Epson Status Monitor shows maintenance warning
- Blinking lights and blocked jobs
- Device is locked until reset is performed
Reset Epson SX425W Waste Ink Counter in 3 Steps
- Schritt 1: Prepare a Windows PC + USB cable and connect Epson SX425W directly. Keep Internet enabled for validation.
- Schritt 2: Start Wic Reset Connect in Administrator mode and wait until Epson SX425W appears in the device list.
- Schritt 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson SX425W.
Most Epson SX425W waste counter resets finish in ~1–2 minutes.
What You Need
- Stable Internet connection during reset
- Windows 7/8/10/11 PC
- USB connection required (Wi-Fi reset not supported)
- Valid Wic Reset Connect reset key
Common Fixes
- Restart printer and PC, then try again.
- Close Epson Status Monitor or other printer utilities.
- Temporarily disable VPN/proxy if validation fails.
- Try another USB cable (some cables are charge-only).
- Run the app as Administrator.
Frequently Asked Questions
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Guide prepared for Epson SX425W – Waste Ink Counter Reset using Wic Reset Connect.