How to Reset Epson L355 Waste Ink Counter

Epson L355 Waste Ink Counter Reset

When the Epson L355 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L355 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson L355 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson L355 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Epson L355 Ink Pad Counter Reset – Quick Steps

  1. Schritt 1: Connect Epson L355 to a Windows computer with a stable Internet connection using a USB cable.
  2. Schritt 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L355.
  3. Schritt 3: Use the key to reset the counter, wait for completion, then restart Epson L355 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Anweisungen

Most Epson L355 waste counter resets finish in ~1–2 minutes.

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson L355 – Waste Ink Counter Reset using Wic Reset Connect.

Warenkorb