How to Reset Epson L3117 Waste Ink Counter

Epson L3117 Waste Ink Counter Reset

When the Epson L3117 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson L3117 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson L3117 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson L3117 waste counter reset in minutes.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson L3117 Ink Pad Counter Reset – Quick Steps

  1. Schritt 1: Use a Windows PC (7–11) with Internet access. Connect Epson L3117 via USB (Wi-Fi reset is not supported).
  2. Schritt 2: Run Wic Reset Connect as Administrator and confirm Epson L3117 is detected.
  3. Schritt 3: Paste the reset key, click Reset, and after completion power-cycle Epson L3117.
Buy Reset Key ⬇️ Download Wic Reset Connect Anweisungen

Most Epson L3117 waste counter resets finish in ~1–2 minutes.

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L3117 – Waste Ink Counter Reset using Wic Reset Connect.

Warenkorb