Fix Epson ET-M2120 Service Required – Waste Counter Reset

Epson ET-M2120 Waste Ink Counter Reset

When the Epson ET-M2120 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson ET-M2120 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson ET-M2120 Waste Ink Counter

Most Epson ET-M2120 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Step-by-Step: Epson ET-M2120 Waste Counter Reset

Schritt 1: Use a Windows PC (7–11) with Internet access. Connect Epson ET-M2120 via USB (Wi-Fi reset is not supported).
Schritt 2: Start Wic Reset Connect in Administrator mode and wait until Epson ET-M2120 appears in the device list.
Schritt 3: Paste the reset key, click Reset, and after completion power-cycle Epson ET-M2120.

Buy Reset Key ⬇️ Download Wic Reset Connect Anweisungen

Most Epson ET-M2120 waste counter resets finish in ~1–2 minutes.

Troubleshooting

Try another USB cable (some cables are charge-only).
Use a direct USB connection (avoid hubs).
Restart printer and PC, then try again.
Temporarily disable VPN/proxy if validation fails.
Run the app as Administrator.

Frequently Asked Questions

How long does it take?

Usually about 1–2 minutes.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson ET-M2120 – Waste Ink Counter Reset using Wic Reset Connect.