Model-specific reset guide
Epson ET-2721 Reset Waste Ink Counter
If your Epson ET-2721 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Why Epson ET-2721 stops printing
Epson ET-2721 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson ET-2721. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson ET-2721
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for ET-2721 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson ET-2721 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-2721.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson ET-2721 is not detected
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Install the original Epson driver for ET-2721; a generic Windows driver may not expose the required communication interface.
Epson ET-2721 reset FAQ
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Does Epson ET-2721 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Restore Epson ET-2721
Ready to restore Epson ET-2721? Check the requirements once more and start the guided reset.