Fix Epson DX5050 Service Required – Waste Counter Reset

Epson DX5050 Waste Ink Counter Reset

The Epson DX5050 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson DX5050 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson DX5050 Show ‘Service Required’?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson DX5050 waste counter reset in minutes.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson DX5050 Waste Counter Reset

  1. Schritt 1: Prepare a Windows PC + USB cable and connect Epson DX5050 directly. Keep Internet enabled for validation.
  2. Schritt 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson DX5050.
  3. Schritt 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson DX5050.
Buy Reset Key ⬇️ Download Wic Reset Connect Anweisungen

Most Epson DX5050 waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

  • Use a direct USB connection (avoid hubs).
  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.
  • Restart printer and PC, then try again.
  • Temporarily disable VPN/proxy if validation fails.

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson DX5050 – Waste Ink Counter Reset using Wic Reset Connect.

Warenkorb