Model-specific reset guide
Canon TR4555 Ink Absorber Full Reset
An absorber warning on Canon TR4555 does not necessarily mean that the printer is mechanically damaged. The software counter and the physical pads must be considered separately.
Before resetting Canon TR4555
The lock is based on accumulated maintenance activity. Resetting Canon TR4555 changes the counter value but does not remove ink already held in the absorber material.
Wic Reset Connect is designed to reset the compatible counter in Canon TR4555. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TR4555
- Turn the printer off.
- Drücken und halten Sie Anhalten/Zurücksetzen.
- Während Sie Stop/Reset gedrückt halten, drücken und halten Sie Strom.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5 mal.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TR4555
Prepare Canon TR4555 before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TR4555 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TR4555 is not detected
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
Canon TR4555 reset FAQ
Wie oft sollte ich Stop/Reset drücken?
For Canon TR4555, use 5 Stop/Reset presses in the sequence shown on this page.
Does Canon TR4555 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Restore Canon TR4555
Ready to reset Canon TR4555? Verify the power light, USB connection and service-mode state before continuing.