Epson K305 Waste Ink Counter Reset

The Epson K305 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson K305 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson K305 Ink Pad Counter Warning?

Most Epson K305 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Step-by-Step: Epson K305 Waste Counter Reset

1. Trin 1: Use a Windows PC (7–11) with Internet access. Connect Epson K305 via USB (Wi-Fi reset is not supported).
2. Trin 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson K305.
3. Trin 3: Use the key to reset the counter, wait for completion, then restart Epson K305 to finalize.

Most Epson K305 waste counter resets finish in ~1–2 minutes.

What You Need

• Valid Wic Reset Connect reset key
• USB connection required (Wi-Fi reset not supported)
• Windows 7/8/10/11 PC
• Stable Internet connection during reset

Troubleshooting

• Run the app as Administrator.
• Temporarily disable VPN/proxy if validation fails.
• Try another USB cable (some cables are charge-only).
• Close Epson Status Monitor or other printer utilities.
• Use a direct USB connection (avoid hubs).

Frequently Asked Questions