Epson K301 Waste Ink Counter Reset

The Epson K301 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson K301 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson K301 Waste Ink Counter

Most Epson K301 waste ink counter locks are solved by a software counter reset. Wic Reset Connect giver en ligetil procedure.

Typiske tegn

• Printeren nægter at udskrive, selv om der er blæk til rådighed
• Epson Status Monitor viser advarsel om vedligeholdelse
• Blinkende lys og blokerede jobs
• Enheden er låst, indtil nulstilling er udført

Three Steps to Restore Epson K301 Printing

1. Trin 1: Connect Epson K301 to a Windows computer with a stable Internet connection using a USB cable.
2. Trin 2: Løb Wic Reset Connect as Administrator and confirm Epson K301 is detected.
3. Trin 3: Use the key to reset the counter, wait for completion, then restart Epson K301 to finalize.

Most Epson K301 waste counter resets finish in ~1–2 minutes.

Hvad du har brug for

• Windows 7/8/10/11 PC
• Stabil internetforbindelse under nulstilling
• USB-forbindelse påkrævet (Wi-Fi-nulstilling understøttes ikke)
• Gyldig Wic-nulstilling Tilslut nulstillingsnøgle

Fejlfinding

• Luk Epson Status Monitor eller andre printerværktøjer.
• Kør appen som administrator.
• Prøv et andet USB-kabel (nogle kabler er kun til opladning).
• Genstart printeren og pc'en, og prøv igen.
• Deaktiver midlertidigt VPN/proxy, hvis valideringen mislykkes.