Epson XP-601 Waste Ink Counter Reset

Epson XP-601 Waste Ink Counter Reset

The Epson XP-601 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson XP-601 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson XP-601 Ink Pad Counter Warning?

Most Epson XP-601 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Epson XP-601 Ink Pad Counter Reset – Quick Steps

  1. Krok 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-601 via USB (Wi-Fi reset is not supported).
  2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson XP-601 appears in the device list.
  3. Krok 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-601.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukce

Most Epson XP-601 waste counter resets finish in ~1–2 minutes.

What You Need

  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key

Troubleshooting

  • Temporarily disable VPN/proxy if validation fails.
  • Run the app as Administrator.
  • Try another USB cable (some cables are charge-only).
  • Use a direct USB connection (avoid hubs).
  • Close Epson Status Monitor or other printer utilities.

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson XP-601 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupní vozík