Model-specific reset guide
Epson WF-2631 Resetování počítadla spotřebovaného inkoustu
If your Epson WF-2631 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
What the Epson WF-2631 service message means
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson WF-2631, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson WF-2631. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson WF-2631
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for WF-2631 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson WF-2631 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WF-2631.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson WF-2631 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson WF-2631 reset FAQ
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Can I reset Epson WF-2631 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson WF-2631
Ready to restore Epson WF-2631? Check the requirements once more and start the guided reset.