Fix Epson WF-2530 Service Required – Waste Counter Reset

Epson WF-2530 Waste Ink Counter Reset

The Epson WF-2530 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson WF-2530 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson WF-2530 Show ‘Service Required’?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson WF-2530 waste counter reset in minutes.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson WF-2530 Waste Counter Reset

  1. Krok 1: Prepare a Windows PC + USB cable and connect Epson WF-2530 directly. Keep Internet enabled for validation.
  2. Krok 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson WF-2530.
  3. Krok 3: Use the key to reset the counter, wait for completion, then restart Epson WF-2530 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukce

Most Epson WF-2530 waste counter resets finish in ~1–2 minutes.

System Requirements

  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC

If the Printer Is Not Detected

  • Restart printer and PC, then try again.
  • Run the app as Administrator.
  • Use a direct USB connection (avoid hubs).
  • Temporarily disable VPN/proxy if validation fails.
  • Try another USB cable (some cables are charge-only).

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson WF-2530 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupní vozík