Reset Epson T25 Waste Ink Counter in Minutes

Epson T25 Waste Ink Counter Reset

If your Epson T25 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson T25 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson T25 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson T25 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson T25 Printing

  1. Krok 1: Prepare a Windows PC + USB cable and connect Epson T25 directly. Keep Internet enabled for validation.
  2. Krok 2: Run Wic Reset Connect as Administrator and confirm Epson T25 is detected.
  3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson T25.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukce

Most Epson T25 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson T25 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupní vozík