Epson PX-503A Ink Pad Counter Reset Guide

Epson PX-503A Waste Ink Counter Reset

When the Epson PX-503A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson PX-503A tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson PX-503A Ink Pad Counter Warning?

Most Epson PX-503A waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Epson PX-503A Ink Pad Counter Reset – Quick Steps

  1. Krok 1: Connect Epson PX-503A to a Windows computer with a stable Internet connection using a USB cable.
  2. Krok 2: Run Wic Reset Connect as Administrator and confirm Epson PX-503A is detected.
  3. Krok 3: Use the key to reset the counter, wait for completion, then restart Epson PX-503A to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukce

Most Epson PX-503A waste counter resets finish in ~1–2 minutes.

What You Need

  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson PX-503A – Waste Ink Counter Reset using Wic Reset Connect.

Nákupní vozík