Fix Epson L575 Service Required – Waste Counter Reset

Epson L575 Waste Ink Counter Reset

If your Epson L575 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L575 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson L575 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson L575 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Step-by-Step: Epson L575 Waste Counter Reset

  1. Krok 1: Connect Epson L575 to a Windows computer with a stable Internet connection using a USB cable.
  2. Krok 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L575.
  3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson L575.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukce

Most Epson L575 waste counter resets finish in ~1–2 minutes.

What You Need

  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key

Troubleshooting

  • Restart printer and PC, then try again.
  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.
  • Try another USB cable (some cables are charge-only).
  • Temporarily disable VPN/proxy if validation fails.

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson L575 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupní vozík