Epson L358 Ink Pad Counter Reset Guide

Epson L358 Waste Ink Counter Reset

The Epson L358 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson L358 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson L358 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson L358 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson L358 Waste Counter Reset

  1. Krok 1: Use a Windows PC (7–11) with Internet access. Connect Epson L358 via USB (Wi-Fi reset is not supported).
  2. Krok 2: Run Wic Reset Connect as Administrator and confirm Epson L358 is detected.
  3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson L358.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukce

Most Epson L358 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

FAQ

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L358 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupní vozík