Epson L3275 Waste Ink Counter Reset

The Epson L3275 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3275 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson L3275 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson L3275 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Epson L3275 Ink Pad Counter Reset – Quick Steps

1. Krok 1: Connect Epson L3275 to a Windows computer with a stable Internet connection using a USB cable.
2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson L3275 appears in the device list.
3. Krok 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson L3275.

Most Epson L3275 waste counter resets finish in ~1–2 minutes.

What You Need

• Windows 7/8/10/11 PC
• Valid Wic Reset Connect reset key
• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)

If the Printer Is Not Detected

• Restart printer and PC, then try again.
• Close Epson Status Monitor or other printer utilities.
• Use a direct USB connection (avoid hubs).
• Run the app as Administrator.
• Temporarily disable VPN/proxy if validation fails.