How to Reset Epson L3270 Waste Ink Counter

Epson L3270 Waste Ink Counter Reset

The Epson L3270 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3270 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson L3270 Stops Printing (Waste Counter Limit)

Most Epson L3270 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Step-by-Step: Epson L3270 Waste Counter Reset

  1. Krok 1: Use a Windows PC (7–11) with Internet access. Connect Epson L3270 via USB (Wi-Fi reset is not supported).
  2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson L3270 appears in the device list.
  3. Krok 3: Use the key to reset the counter, wait for completion, then restart Epson L3270 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukce

Most Epson L3270 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key

If the Printer Is Not Detected

  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.
  • Restart printer and PC, then try again.
  • Use a direct USB connection (avoid hubs).
  • Temporarily disable VPN/proxy if validation fails.

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson L3270 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupní vozík