Fix Epson XP-410 Service Required – Waste Counter Reset

Epson XP-410 Waste Ink Counter Reset

When the Epson XP-410 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson XP-410 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson XP-410 Show ‘Service Required’?

Most Epson XP-410 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Three Steps to Restore Epson XP-410 Printing

  1. Стъпка 1: Connect Epson XP-410 to a Windows computer with a stable Internet connection using a USB cable.
  2. Стъпка 2: Run Wic Reset Connect as Administrator and confirm Epson XP-410 is detected.
  3. Стъпка 3: Use the key to reset the counter, wait for completion, then restart Epson XP-410 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Инструкции

Most Epson XP-410 waste counter resets finish in ~1–2 minutes.

What You Need

  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC

Common Fixes

  • Restart printer and PC, then try again.
  • Temporarily disable VPN/proxy if validation fails.
  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.
  • Use a direct USB connection (avoid hubs).

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson XP-410 – Waste Ink Counter Reset using Wic Reset Connect.

Пазарска количка