Epson SX415 Waste Ink Counter Reset

The Epson SX415 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson SX415 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson SX415 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson SX415 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Three Steps to Restore Epson SX415 Printing

1. Стъпка 1: Connect Epson SX415 to a Windows computer with a stable Internet connection using a USB cable.
2. Стъпка 2: Run Wic Reset Connect as Administrator and confirm Epson SX415 is detected.
3. Стъпка 3: Use the key to reset the counter, wait for completion, then restart Epson SX415 to finalize.

Most Epson SX415 waste counter resets finish in ~1–2 minutes.

What You Need

• Windows 7/8/10/11 PC
• Stable Internet connection during reset
• Valid Wic Reset Connect reset key
• USB connection required (Wi-Fi reset not supported)

Common Fixes

• Temporarily disable VPN/proxy if validation fails.
• Restart printer and PC, then try again.
• Use a direct USB connection (avoid hubs).
• Close Epson Status Monitor or other printer utilities.
• Run the app as Administrator.

FAQ