特定型号重置指南
Epson SX415 Reset Waste Ink Counter
The service-required message on Epson SX415 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
Before resetting Epson SX415
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson SX415, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect 旨在重置兼容的计数器 Epson SX415. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson SX415
先完成以下连接检查，然后运行重置程序；在此过程中不要打开其他打印机程序。.
-
安装原始驱动程序
Install the official Epson driver for SX415 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson SX415 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson SX415.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson SX415 is not detected
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- Install the original Epson driver for SX415; a generic Windows driver may not expose the required communication interface.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
Epson SX415 reset FAQ
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Can I reset Epson SX415 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.