Epson SX409 Waste Ink Counter Reset

The Epson SX409 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson SX409 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson SX409 Stops Printing (Waste Counter Limit)

Most Epson SX409 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Three Steps to Restore Epson SX409 Printing

1. Стъпка 1: Use a Windows PC (7–11) with Internet access. Connect Epson SX409 via USB (Wi-Fi reset is not supported).
2. Стъпка 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson SX409.
3. Стъпка 3: Use the key to reset the counter, wait for completion, then restart Epson SX409 to finalize.

Most Epson SX409 waste counter resets finish in ~1–2 minutes.

What You Need

• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)
• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC

Common Fixes

• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).
• Try another USB cable (some cables are charge-only).
• Restart printer and PC, then try again.
• Temporarily disable VPN/proxy if validation fails.

Frequently Asked Questions